Description: Smith & Wesson Model 39-2, 9mm pistol, alloy frame serial number A19957x. This is decent Model 39 with some very minor pitting on the slide. We would rate this about 85%. This firearm is part of large estate of consignment firearms that we are handling for the Administrator of the Estate. SMITH & WESSON model 39-2, 9mm S & W model 39-2, Serial # A121236, in AS NEW condition as it has been in storage for several 30+ years,100% blue, 100% wood, no dings or scratches, original box, papers. All of the following S&W 2nd and 3rd generation 9mm pistols are essentially derivatives of these two and in many cases, their model number provides some clue to that origin. The S&W Model 39 and the 439 that followed are among the only S&W semi-autos to come standard with a blued finish and wood grips. 2nd Gen Pistols. I have a S&W model 39-2 with a serial number A578XXX and was just wondering if anyone out there could tell me about how old it might be. I suspect it's older than me (1978) but would like to know for sure. I know there's a book out there with the approx. Dates but I'm not a collector, just interested in knowing about how old this particular gun is.

• Sw 39 2 Serial Numbers Online
• Sw 39 2 Serial Numbers Generator
• Sw 39 2 Serial Numbers Doreen
• Sw 39 2 Serial Numbers Lookup
• S&w 39-2 Serial Numbers
• S W 39 2 Serial Numbers

The Smith & Wesson Model 39 semi-automatic handgun served U.S. Navy SEALs during the Vietnam War and then went on to become one of the American nine-millimeter high capacity pistols, the Model 59.

Today, Smith & Wesson is mostly known for revolvers and their growing line of M&P pistols. Despite the rapidly growing popularity of these polymer-framed striker fired semi-auto pistols, there’s also a lot of buzz around the former metal-framed S&W pistols that were discontinued a few years ago.

Prices on the used market for the so-called 1st, 2nd, and 3rd generation S&W pistols are still affordable, but have been rapidly rising over the past couple of years. These pistols are usually tough, reliable, and excellent shooters. If you happen to run across one for a good price, now would be a great time to snatch it up.

The trouble with that plan is the absurdly confusing system that S&W used to assign the model numbers for these pistols. Today, their M&P pistols follow a pretty logical formula. I carry a M&P9c — a compact 9mm. Makes sense, right? Well, the 3rd Gen equivalent of that pistol is the 6904. But if it was made before the late 80’s, it would be the 2nd Gen version — the 469. And the single stack version would be the 3914, which is virtually identical to the 908. Confused yet?

Unless you’ve committed these models to memory, looking at the numbers stamped on the slide of an old S&W pistol in the case at a gun shop or an online ad doesn’t really tell you much. Even if you ask Google for some help, you might have to wade through a multi-page forum thread to get a straight answer.

Well, believe it or not, there is some logic to the old S&W numbering system, it’s just not particularly intuitive. So we whipped together this S&W semi-auto model number quick reference chart to make it a little easier for you the next time you misplace your S&W decoder ring.

Our chart covers most of the regular production models for the discontinued Smiths chambered in major service calibers. There are a few less common ones out there, but these are the pistols you’re most likely to run across today. Even with the chart, there might be a few confusing details about the numbering system, so keep reading for a little background info on each “generation” of S&W autos.

1st Gen Pistols

The first S&W semi-automatic chambered in a service caliber was the Model 39, which first saw the light of day in 1954. The aluminum alloy-framed 9mm pistol had an 8-shot single-stack magazine, a 4-inch barrel and a traditional double action/single action trigger with a slide-mounted safety/decocker, similar to what many people are familiar with from the Beretta 92 series. The Model 39 was developed as a potential replacement for the U.S. Army’s M1911A1. The Army declined to adopt the Model 39, but the pistol was a commercial success, and was even used by a few police departments as one of the very first semi-autos carried by American law enforcement.

In the early 1970s, S&W released a version of the 39 that used a double-stack 14-round magazine dubbed the Model 59. Together, the 39 and 59 are considered the “first generation” of S&W semi-autos. All of the following S&W 2nd and 3rd generation 9mm pistols are essentially derivatives of these two and in many cases, their model number provides some clue to that origin.

2nd Gen Pistols

In the late 1970s the S&W models 439 and 459 were released, which are considered the first of the second generation pistols. These were basically the 39 and 59 with a few small changes and the number “4” added to the begining of the model number. Steel framed versions of these pistols followed, available with either a stainless, blued, or nickel finish. Blued and nickel model numbers start with “5” (539, 559) and the stainless steel models start with “6” (639, 659).

In the mid 1980s, S&W released two alloy-framed compact versions of the 59 series; the 469 (blued or nickel finish) and 669 (stainless finish). Establishing the form factor that the third gen compacts would follow, these pistols had a 3.5-inch barrel and 12-round magazine. /keynote-83-dmg-download.html.

Around this same time, S&W also began producing their first .45 ACP pistol — the model 645. This was a large frame, single stack pistol with an 8-round magazine, 5-inch barrel, and DA/SA with slide-mounted safety/decocker just like the 9mm pistols. There is one variant of the second gen .45 pistol — the single action only model 745, which was a special limited run intended for IPSC competition shooters.

I hope you caught all that because here’s where it gets complicated…

3rd Gen Pistols

The third generation of S&W pistols started hitting the market in the late 80s. They can be easily spotted by their four-digit model numbers. S&W continued the numbering trend they had started on the 9mm pistols — the 3900 series are full size and compact single stack pistols, the 5900 series are double stacks, and the 6900 series are compact double stacks.

Third gen pistols in other calibers are much easier to remember. The 4500 series is for .45 ACP, 4000 series for .40 S&W, and 1000 series for 10mm.

So, looking at the first two digits of a four-digit model number from a 3rd gen pistol, we can know the caliber, and if it’s a 9mm, we might also know the frame size. The rest of the info we’d need is in the second half of the model number.

The third digit indicates one of nine possible combinations of action type and frame size. Most S&W autos are DA/SA, but not all. Some are double action only (DAO), and a few were even made with a slide-mounted decocking lever and no external safety (similar to what you’d find on a Sig P220 series pistol). Each model series has a frame size and barrel length that is “standard” for that series, which we’ve listed on the chart. The third digit will tell you if a given model is the standard size, mid-size, or compact.

Sw 39 2 Serial Numbers Online

The final digit in the model number indicates the frame material and finish. Frames are either steel or aluminum alloy and the finish is either blued/black (sometimes with a nickel plating), or stainless/silver.

Exceptions

What makes this complex system frustrating to follow is that there are multiple exceptions to the product “codes”. Some are pretty easy to figure out like the “value” series pistols. These were budget versions of the third gen pistols that lack some of the finishing touches of the standard models and have a three-digit model number. The first two digits reflect the caliber (9, 40, or 45).

The Chief’s Special pistols are also easy to spot, like the one in the header image of this post. They are single stack, sub-compact variants with a “CS” pre-fix and they’re some of the most sought-after 3rd gen pistols on the used market. There’s one model each chambered in 9mm, .40 S&W, and .45ACP called the CS9, CS40, and CS45 respectively.

Besides these obvious exceptions, there are a few sneaky model numbers that look normal but don’t follow the numbering trends. For instance, the 6906 should really be the 6903 — a “6” for the final digit normally means stainless steel, but the 6906 is an alloy framed pistol with a silver stainless finish.

The compact .40 S&W pistols can also be confusing. https://yellowmerchant962.weebly.com/blog/adobe-updater-cs3-mac-download. Most are double stack, but a few single stack versions were made. The model 4040PD in particular breaks multiple model numbering “rules” and seems to have been given its name arbitrarily.

Letter suffixes are another detail to watch for. A couple of letters tacked to the end of the model name might mean something minor like a new finish, but they can also indicate major changes like the “TSW” (Tactical Smith & Wesson) series of pistols which indicate the addition of features like improved sights and accessory rails. Sometimes, the TSW pistols were built with a completely different frame size and barrel length than the standard model.

Some of the oddball model names come from pistols developed by S&W’s in-house custom shop, the Performance Center. To keep things simple (relatively speaking, anyway) we didn’t include these and other obscure models in our chart. If you want more detailed information on any of these models, I highly recommend picking up the Standard Catalog of Smith & Wesson which was a huge help in verifying the info for the chart.

Hopefully, the next time you’re trying to track down a deal on an old Smith, this info will help your search go a little quicker. If we’ve missed anything important, or if you spot any errors in the chart, let me know and I’ll try to correct it ASAP. If you guys like this one, be sure to tell us in the comments and maybe we’ll tackle S&W revolvers in the next one!

Sw 39 2 Serial Numbers Generator

The Smith & Wesson Model 39 is a semi-automatic pistol developed for the United States Army service pistol trials of 1954.^[1] After the Army abandoned its search for a new pistol, the Model 39 went on the civilian market in 1955 and was the first of Smith & Wesson's first generation semi-automatic pistols.^[1] A modified version saw limited use with Naval Special Warfare units as the Mk 22 Mod 0.

Sw 39 2 Serial Numbers Doreen

Overview[edit]

The Smith & Wesson Model 39 was the first U.S. designed double action (DA) semi-automatic pistol marketed in the United States. The German Walther P38 DA pistol impressed American ordnance personnel during World War II. The Army Ordnance Corps issued a proposal for an American equivalent to the P38. In 1949, Smith & Wesson began development of the Model 39 chambered in 9×19mm Luger and it entered the market in 1955. This is considered a first generation pistol. Since the Model 39 came out, S&W has continuously developed the design into its third generation pistols now on the market. First generation models use a 2 digit model number, second generation use 3 digits, and third generation models use 4 digits.^[1]

The Model 39 was originally manufactured with an anodized aluminum frame, a curved backstrap and a blued carbon steel slide that carried the manual safety. The grip was of three pieces made of two walnut wood panels joined by a metal backstrap. It has a magazine release located at the rear of the trigger guard, similar to the M1911A1 it was designed to replace.^[1]It was also produced in single-action configuration, as the Model 44.

The Model 39 was produced in limited numbers with a steel frame. This steel-frame model provided the basis for the Model 52 target pistol. The Model 52 had a longer (5 inch) barrel and slide and was one of the few semi-automatic pistols ever chambered for the .38 Special cartridge (with flush-seated, full wadcutter bullets only). The shape of the rimmed cartridge limited the magazine capacity to five rounds. A further variant, the Model 952, in 9mm Luger, is still produced in limited quantities by Smith & Wesson's Performance Center. The Model 52 was discontinued in 1992 when the machinery to manufacture the pistol broke down and it was deemed too costly to replace.^[1]

The Model 39 was the basis for the later Smith & Wesson Model 59, retaining the original 9mm Parabellum caliber, but incorporating a wider aluminum frame with a straight backstrap to accommodate a double-column magazine that could hold 14 rounds.^[1]

The Model 39 used a conventional slide, barrel bushing, slide arrangement as opposed to the exposed barrel arrangement of the P38. Model 39 locking is done by a modification of the Browning P35 (High Power) cam-locked breech. First generation Model 39 slides used either a long, spring steel extractor or a spring-loaded, pivoting claw extractor. Long extractors tended to be fragile and were replaced by the pivoting type. However, the long extractor proved to be more reliable than the pivoting version.^[2]

The Model 39 employed many features common to the Walther P38 such as a decocking safety that disconnected the trigger and hammer. Smith & Wesson even copied the 8-round single-stack magazine as well but added a magazine catch cutout to it. The overall length of the Model 39 was 7.6 inches, the barrel is 4 inches long. The weight of the Model 39 was 1.72 pounds; this light weight is due to its aluminum frame.^[1]

The Illinois State Police adopted the Model 39 in 1968^[3], an action which helped ingratiate semi-automatic pistols with law enforcement. This publicity helped commercial sales and set the stage for the more acceptable Model 59 with its high capacity magazine at least in undercover or detective police use where the DA feature (and the larger magazine capacity) was considered by many to be superior to single-stack semi-automatics and revolvers of the time.^[1]

Sw 39 2 Serial Numbers Lookup

A modified version of the Model 39 with a wider grip frame to accommodate a 14-round magazine was used by Naval Special Warfare units during the Vietnam War.^[4] It was issued to officers-in-charge (OICs) of MST-2 detachments as their sidearm. SEAL Teams used either the Model 39 without modification or a modified version, the Mk 22 Mod 0, which was called the 'hush puppy'.^[4] The modified pistol had a suppressor with a slide lock (preventing the slide from moving backwards upon firing, thereby decreasing produced noise). The Mk 22 Mod 0 had raised iron sights, to provide easier sighting over a bulky suppressor. The gun's purpose was to eliminate sentry dogs or guards without alarming the main target.^[1][2]

See also[edit]

References[edit]

S&w 39-2 Serial Numbers

1. ^ ^abcdefghiHartink, A.E. (2002). The Complete Encyclopedia of Pistols and Revolvers. Edison, New Jersey: Chartwell Books, Inc. pp. 87–88. ISBN978-0-7858-1519-8.
2. ^ ^abSupica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 285–286. ISBN0-89689-293-X.
3. ^'History of Smith & Wesson'. Smith and Wesson.
4. ^ ^abDockery, Kevin (2004). Weapons of the Navy SEALs. California: Berkeley Hardcover. ISBN0-425-19834-0.

S W 39 2 Serial Numbers

External links[edit]